Maize harvest header
ORBIS maize front attachment
Despite its large working width, the ORBIS maize front attachment is able to follow the ground contours optimally. The flat mounting angle with two different positions and the very flat design make it possible to attain stubble heights as low as 80 mm.
These characteristics and the use of both small and large three-stage transport discs mean that the ORBIS can be used to harvest not only maize, but whole crop silage too.
ORBIS 450 600
Note: only 450 and 600 are available in Vietnam
| Model | Max. output ECE R 120 (hp) | Engine type |
|---|---|---|
|
450 |
4.48 |
CONTOUR |
|
600 |
6.01 |
AUTO CONTOUR-CONTOUR |
Outstanding reliability in all harvesting conditions.
- Efficient drive concept with 11% lower starting torque than comparable models
- Unique crop flow for optimal chopping quality
- Optimal ground-contour tracking with AUTO CONTOUR
- Very low stubble height across the entire working width
- Engage and reverse under full load
- Straight-line crop transfer from ORBIS to the JAGUAR forage harvester for top chop quality
- Uniform crop flow across the entire width of the feed roller housing
- Extremely flat design for even stubble and very low stubble heights down to 80 mm
- ORBIS 600 SD with small discs for short to medium crop heights
- ORBIS 600 with large discs for medium to extremely tall maize
- Folds out symmetrically within just 25 s (ORBIS 900) or 15 s (ORBIS 750)
- Integrated transport system available with ORBIS 600 and higher
English 
Vietnamese